Types of concrete blocks Types of concrete blocks depend upon the structure, size, shape, and manufacturing process of concrete blocks; it is classified into two categories. Hollow concrete
Translucent concrete The translucent concrete has been noted in the architectural press as follows. University of Houston (Bill Price) has replaced the traditional concrete materials, i.e., fine aggregate, coarse aggregate,
Concrete expansion joint A concrete expansion joint or isolation joint is a gap that allows the concrete to expand and contract when the temperature changes. Expansion joints form
Precast concrete Walls are a panel system featuring solid precast walls in the typical thickness of 6 inches or greater may be non-load bearing or load-bearing. the mix
Foam concrete It consists mainly of air pores and cement with fillers such as fly ash or sand.do not use Coarse aggregates in foamed concrete and the air
Bond beam It is a horizontally reinforced element in a masonry wall that provides resistance to help distribute lateral loads throughout the wall section and also shear loads.
Flexural Strength of Concrete Flexural strength of concrete is the measure of the tensile strength of concrete and to resist failure in the bending it is a measure
The Fiber reinforced concrete contains fibrous material that is uniformly distributed and randomly oriented and its structural integrity increases by this. Possessing certain characteristics properties fiber is a
Lightweight concrete is made with lightweight coarse aggregates such as clay, slate, or shale which give it its characteristic low density. Lightweight concrete involves an expanding agent that
Self Healing Concrete Self-healing concrete is used to fill up the cracks after hardening, which is developed in structures with the help of bacterial reactions in the concrete.
Compaction Factor Test The compaction factor test is used to calculate the degree of workability of fresh concrete with regard to the internal energy required for computing the
Types of Concrete: Different types of concrete are produced based on the mix design, the method of construction, area of application, the form of hydration reaction, and constituent
PLATE LOAD TEST Plate Load Test is used for selection and design of shallow foundation plate load test is very popular, this test is used to determine the
Curing of Concrete Curing concrete is the method to protect against loss of moisture required for hydration and kept within the recommended temperature range, and curing fresh wet
