# HOW WEIGHT OF STEEL CALCULATION WAS DONE?

The weight of steel calculation is very important, but before calculating weight it is important to properly understand the properties of steel. In steel, the carbon is between 0.002 % to 2.14 % by its weight of the steel. The carbon ratio value of steel may vary and it depends on which steel alloying element is going using such as carbon, nickel, chromium, manganese, iron, and other alloying elements.

Iron with alloy carbon is present in the steel, which doesn’t undergo any eutectic reactions but cast iron always undergoes in eutectic reactions. If the carbon content is too low present in the steel. The iron will be soft, weak and also very ductile in its properties.

As we mention early the carbon will be in the weight of steel up to** 2.14** % of its weight. The weight of steel bars can be calculated theoretically as well as physically. In this article, we are going to discuss theoretical methods. The weight of the steel bar can be calculated in two ways.

- By
**Density**of steel - By
**Formula**

## BY DENSITY OF STEEL:

It is very important to know the unit weight of steel bars as well as rectangular steel plates, in **kilograms** and **Tons**. The given below formula is most commonly used in the calculation of rectangular steel plate weight calculation. Note: The Density of steel is **7850 kg/m³**

**FORMULA:**

** **Weight =** Volume X Density**

**EXAMPLE: **Let’s suppose we have a **rectangular steel plate** having a Length of 1 m or a Width of **0.5 m** the Depth (Thickness) is** 0.3 m**. To calculate the theoretical unit weight of a rectangular steel plate?

**Given Data:**

Length = **1 m (1,000 mm)**

Width = **0.5 m (500 mm)**

Thickness = **0.3 m (300 mm)**

**Solution:**

First, calculate the volume of the steel sheet.

Volume = (L x W x T)

= 1 m x 0.5 m x 0.3 m

= **0.15 m^3.**

Weight = Volume x Density

= o.15 x 7850

= **1177.5 kg. Ans.**

**Note:** If you are calculating the weight of a circular steel reinforcement bar then calculate its volume by using this formula (πD^2/4) and then just multiply by the density of steel which is **7850 kg/m^3.**

## BY FORMULA:

To calculate the weight of **circular reinforcement bars etc.** The given below formula is most commonly used at site level steel weight calculation which is.

**FORMULA:**

Weight = **(D²/162) x Length**

**Example:** Let’s Suppose we have a circular reinforcement bar which has a diameter (D) of 12 mm and a length of **10 m**.

**1.** So calculate the weight of the circular reinforcement bar.

**Given Data:**

Diameter = **12 mm**

Length = **10 m**

**Solution:**

By using the steel weight formula put the given values.

Weight = (D²/162) x Length

= (12 x 12/162) x 10

= **8.8 kg Ans…**

So the 10-meter long bar has a diameter of 12 mm its weight will be 8.8 kg. So in this way, we can calculate the theoretical weight of steel at the site.

Note: If the properties of the steel change its physical weight will also be changed.

**Civil Notes App:-**

**1: Quantity surveying,****2: Concrete,****3:****Steel,**Notes available in this Android App.

Click on the Below Picture to Download free from the play store.

Civil Notes:- https://play.google.com/store/apps/details?id=com.engineering.civil.notes.clicks

Why not also show the calculation in English units?