TYPES OF SCAFFOLDING THAT ARE COMMONLY USE AT SITES

We have many types of Scaffolding but four important scaffolding are described below.

  1. Steel or tubular Scaffolding.
  2. Masons Scaffolding
  3. Bricklayers Scaffolding
  4. Needle Scaffolding.

1.STEEL / TUBULAR IS THE TYPES OF SCAFFOLDING:

The steel or timber scaffolding is essentially similar. The wooden member is replaced by 38-64 mm diameter steel tubes. Special types of steel couplets or fittings are used for connecting different members.

In this type of scaffolding, the vertical tubes called uprights are spaced 2.5 to 3 m apart. Each standard is welded to a base plate. The steel scaffolding plate has a hole in its base to be spiked to a timber or concrete base. In this way, a rigid foundation is formed for the scaffolding.

Ledgers are spaced at 1.8 m vertically apart, and the short tubes are normally 1.2 to 1.8 m in length.

TUBULAR SCAFFOLDING:

Tubular scaffolding mounted on wheels and can be used for carrying out the work of painting the walls, underside roof, etc.

Tubular scaffolding has several advantages over timber scaffolding, such as rapid erection and dismantling, greater strength, and durability.

TYPES OF SCAFFOLDING

2. MASON’S SCAFFOLDING:

Usually, mason’s scaffolding is used in stone masonry work. In mason’s scaffolding, two frames of standards, at a distance of 1.5 m from the first one. The mason’s scaffolding is entirely independent of the stone wall.

The mason’s scaffolding is used to carry heavy loads because loads of the stone block are very heavy. Hence the mason’s scaffolding is made stronger by placing the standards at a fairly close distance apart.

3. BRICKLAYER SCAFFOLDING:

This type of Scaffolding consists of standards firmly. Ledgers connect the Standards at every rise of 120 to 150 cm. The bricklayer scaffoldings are provided on the building side and are secured in position with the help of rope lashing.

In high Scaffolding, the cross braces are used to stiffen the temporary structure. The Braces which is used in temporary structure consist of poles tied by rope-lashing on the standard.

4. NEEDLE SCAFFOLDING:

The needle scaffolding is to provide for a building on the side of a busy street where construction of ordinary scaffolding will obstruct at that place needle scaffolding is used.

TYPES OF SCAFFOLDING THAT ARE COMMONLY USE AT SITES 1

Share This information with your Friends…..

3 Comments

Add a Comment

Your email address will not be published. Required fields are marked *